|
The grinding and preparation of limestone are specifically designed
to reduce both fuels and sorbents in fluid bed boiler applications
and are designed, constructed and commissioned by Roberts &
Schaefer Company. Most limestone grinding systems include receipt,
handling, milling, drying, and sizing with the finished product
conveyed to a storage system, and subsequently, fed to the station's
circulating fluidized bed boiler (CFB). Grinding limestone requires
a careful understanding on the handling of fine particle sized
material.
Roberts & Schaefer Company's "Full Service" experience
provides the added advantage of a single supplier, accepting total
responsibility for the execution of each limestone grinding &
preparation system undertaken.
The projects below define our "Full Service" Limestone
Grinding & Preparation capabilities.
FOSTER WHEELER USA
 First
Energy, Bay Shore Station
Oregon, Ohio
Under a turnkey contract, Roberts & Schaefer designed, furnished,
installed and commissioned a limestone handling system at Bay
Shore Unit 1 power station which included receiving conveyor,
pocket conveyor, air heater combustion chamber, a rod mill and
dust collection systems. In-depth
project information
SCRUBGRASS POWER GENERATING COMPANY
 Scrubgrass
Power Plant
Ventigo County, Pennsylvania
Scrubgrass Power Generating Co. selected R&S to create a limestone
storage and reclaim and processing facility requiring major off-site
pre-assembly and fabrication to meet the challenge of limited
on site work. R&S met the challenge and the project was completed
in under 15 months. In-depth project
information
More Limestone
Grinding & Preparation Projects
|
